Tenders — National Research Council of Canada (NRC)
Public body / Data updated November 16, 2026 / 24 months, November 15, 2024 to November 16, 2026
Over 24 months, National Research Council of Canada (NRC) accounts for 474 published tenders, or 0.4% of everything Adjulo tracks. 60% of these tenders are open tenders, compared with 32% overall; direct awards make up 25%. 32 tenders are open today for this organization.
Open tenders
32 tenders are accepting bids today, listed by closing date.
/ closes today
Requirement of multiple Lap and Polish Tools
The National Research Council of Canada (NRC) is procuring lapping and polishing tools for its Canadian Photonics Fabrication Centre (CPFC) in Ottawa to modernize its photonics foundry and process 4-inch wafers: three modular wafer bonding systems, one LP70 multi-station lapping and polishing system, one PP6GT precision polishing fixture, one CG10 contact gauge and one solvent vapour cleaning system.Summary generated by Maple AI
/ closes today
Large Slurry Mixer
The NRC, through its Clean Energy Innovation Research Centre in Boucherville (Quebec), is seeking information on high-capacity ink mixers for preparing battery electrode inks (lithium-ion and emerging battery technologies) on a prototyping line, featuring planetary and dispersive mixing, vacuum mixing, temperature control and compatibility with common solvents.Summary generated by Maple AI
/ closes today
Chemical Beam Epitaxy (CBE) Growth System for III-V Semiconductors
Supply, delivery, installation and commissioning of a chemical beam epitaxy (CBE) growth system for III-V semiconductors, replacing the existing epitaxy infrastructure of the National Research Council of Canada in Ontario. Delivery required no later than January 7, 2028.Summary generated by Maple AI
/ closes tomorrow
Medium-Size Rugged Outdoor Ground Robots
The National Research Council of Canada, through its Drone Innovation Centre in Mississauga, seeks to acquire two rugged medium-sized unmanned ground vehicles suited to outdoor conditions, to be delivered by March 26, 2027. Open only to Canadian suppliers.Summary generated by Maple AI
/ closes in 2 days
ROBOTIC ARMS & LINEAR ACTUATOR
The National Research Council of Canada (NRC) is acquiring two robotic arms, one linear actuator and related auxiliary equipment to automate laboratory tasks: handling, testing and assembly of medium-sized components, and handling of samples and parts in a controlled environment. Delivery required within 12 weeks of contract award, at Clean Energy Innovation in Mississauga.Summary generated by Maple AI
/ closes in 3 days
Bruker VERTEX NEO Ultra Fourier-transform Infrared Vacuum Spectrometer
Acquisition of a research-grade, high-performance vacuum Fourier transform infrared (FTIR) spectrometer with high spectral resolution for mid- and far-infrared measurements, supporting rapid-scan and step-scan modes, reflectance, transmission and ATR, plus integrated spectroscopy software for data acquisition, processing and management.Summary generated by Maple AI
/ closes in 4 days
Composite Cutting Saw
Acquisition of a new composite cutting saw to replace an in-house unit that does not meet operational and safety requirements. It will cut innovative composite materials into test specimens for metrology and mechanical testing, supporting NRC research and development work.Summary generated by Maple AI
/ closes in 4 days
High Resolution and High-Speed Camera
Acquisition of high-performance imaging cameras serving as the primary detection components of a long-range, wide-field-of-view imaging system for drone detection research, with sufficient resolution, sensitivity and frame rate to reliably capture small, fast-moving aerial targets at long standoff distances.Summary generated by Maple AI
/ closes in 7 days
Hexapod 6-axis high-precision positioning
The National Research Council of Canada requires an ALIO hexapod model AI-HH-LM100XY-15Z-56RT-ACS to combine fast x-y scanning, vertical (z) scanning, and rapid reorientation of the sample across 3 angles, for use with very fast measurement systems.Summary generated by Maple AI
/ closes in 8 days
Benchtop Multiple Reactor Systems
Acquisition by the NRC Clean Energy Innovations Research Centre of two benchtop multi-reactor systems: one with integrated automated sampling coupled to an autonomous acceleration platform for real-time characterization of hydrometallurgical processes, and one multi-reactor system for characterizing crystallization processes (turbidity, solubility, nucleation), under the Critical Materials for Batteries Initiative.Summary generated by Maple AI
/ closes in 8 days
Facet Coater
Acquisition of double ion beam sputtering (DIBS) laser facet coating systems for the Canadian Photonics Fabrication Centre (CPFC) of the National Research Council of Canada, to modernize an ISO 6 cleanroom and supply known good dies (KGD) for indium phosphide (InP) photonic devices.Summary generated by Maple AI
/ closes in 8 days
Sanitary and Storm Sewer Separation - Phase 4
Phase 4 separation of sanitary and storm sewers at 1200 Montréal Street in Ottawa, Ontario, for the National Research Council of Canada (NRC), which is seeking a contractor.Summary generated by Maple AI
/ closes in 8 days
New Benchtop Nuclear Magnetic Resonance (NMR) Spectrometer
The National Research Council of Canada (NRC) in Ottawa, Ontario, requires a new benchtop nuclear magnetic resonance (NMR) spectrometer. The contract takes effect on award and ends one year after delivery and acceptance; all deliverables due by March 31, 2027.Summary generated by Maple AI
/ closes in 9 days
Purchase of two (2) Millimetre-Wave Frequency Extender Modules for a Vector Network Analyzers (VNAs) from 110 GHz to 170 GHz
Purchase of two millimeter-wave frequency extension modules covering 110 to 170 GHz for existing vector network analyzers at the NRC Herzberg laboratory, supporting radio astronomy research on low-noise receiver front-ends.Summary generated by Maple AI
/ closes in 10 days
Indium Phosphide Wafers/Substrates
The National Research Council of Canada (NRC) is procuring 50 4-inch sulphur-doped indium phosphide wafers and 50 4-inch iron-doped indium phosphide wafers, for its compound semiconductor fabrication infrastructure.Summary generated by Maple AI
Show the other 17 tenders
/ closes in 14 days
SAS01 Tunnel Waterproofing
The National Research Council of Canada (NRC) is seeking a contractor to rehabilitate and waterproof a tunnel at building SAS01, 110 Gymnasium Place, in Saskatoon, Saskatchewan.Summary generated by Maple AI
/ closes in 14 days
Selective Laser Sintering (SLS) 3D Printing System
National Research Council Canada is purchasing a new selective laser sintering (SLS) 3D printing system, deliverable to Mississauga, Ontario, no later than January 29, 2027. Set aside for Canadian suppliers under the Indigenous Procurement Strategy; award to the lowest-priced compliant bidder.Summary generated by Maple AI
/ closes in 14 days
Integrated High Frequency advanced electronic test and measurement platform
The National Research Council Canada's Quantum and Nanotechnologies Research Centre is acquiring an integrated high-frequency electronic testing and measurement platform, fully compatible, operated by a unified software suite provided and supported by the vendor, and compatible with existing systems.Summary generated by Maple AI
/ closes in 15 days
25-58288 Free Running Submarine Model (FRSM)
Manufacture and delivery of one (1) free-running submarine model (FRSM) for the Ocean, Coastal and River Engineering Research Centre (OCRE) of the National Research Council of Canada, at its St. John's (Newfoundland and Labrador) facilities, for underwater hydrodynamics research on current and future submarine architectures.Summary generated by Maple AI
/ closes in 17 days
Windows upgrade services – Phase 1 (Corridor Link & Roofing)
The National Research Council of Canada (NRC) intends to retain a consulting firm or joint venture for window replacement, Phase 1 (connecting corridor and roof), at 1 Arctic Avenue, St. John's (Newfoundland and Labrador).Summary generated by Maple AI
/ closes in 18 days
Purchase of a Dual Laser Cutter/ Engraver
Acquisition of a dual-source laser cutter-engraver capable of cutting large plastic sheets and engraving plastic as well as metal parts, painted or bare.Summary generated by Maple AI
/ closes in 18 days
Purchase of a high-accuracy portable coordinate measuring machine (CMM) or an articulated metrology arm
Acquisition of a 2.5 m high-precision portable CMM (articulated metrology arm) to measure radio telescope antenna panels and various machined parts for quality control, verification and alignment.Summary generated by Maple AI
/ closes in 21 days
Bell 206B Composite Main Rotor Blades
Acquisition of a set of composite main rotor blades for the Bell 206B, to apply experimental erosion-resistant coatings; ground tests planned and possibly a short flight test.Summary generated by Maple AI
/ closes in 21 days
Laboratory Scale Electrode Calendaring System
The NRC, in Mississauga (Ontario), is seeking a laboratory electrode calendering system, deliverable no later than February 26, 2027. Reissued request for proposals, open only to Canadian suppliers; award to the lowest compliant price.Summary generated by Maple AI
/ closes in 21 days
M-54 Parking Lot, Watermain and Storm Rehabilitation Project
Restoration of the parking lot, main water line and storm damage repairs at NRC Building M-54, 1200 Montreal Road, Ottawa (Ontario). Mandatory site visit scheduled.Summary generated by Maple AI
/ closes in 21 days
Web-based Platform for Whole Building Life Cycle Analysis (WBLCA) and Embodied Carbon emissions in building and infrastructure construction
The National Research Council of Canada seeks to acquire a secure, scalable, bilingual online platform for reporting, analyzing and visualizing embodied carbon emissions from building and infrastructure construction projects. The contract covers design, development, deployment and ongoing support, including data import/export, customizable dashboards and an anonymized public dataset.Summary generated by Maple AI
/ closes in 22 days
26-58007 Mobile Ground Control Station (MGCS) and Cargo Trailer for Drone Field Operations
Design, integration and delivery by NRC-IDC of a mobile ground control station (MGCS) and a companion enclosed cargo trailer for field drone operations in remote environments. Will support research on multi-drone flights, ISR, electronic warfare, beyond visual line of sight flights and onboard autonomy.Summary generated by Maple AI
/ closes in 22 days
26-58007 Mobile Ground Control Station (MGCS) and Cargo Trailer for Drone Field Operations
The NRC Drone Innovation Centre requires the design, integration and delivery of a mobile ground control station and a complementary enclosed cargo trailer to support drone flight operations, flight data acquisition and demonstrations in remote environments.Summary generated by Maple AI
/ closes in 22 days
Temperature Cycling Chambers
The NRC is procuring thermal cycling chambers to evaluate lithium-ion battery systems under controlled temperatures at its Automotive and Surface Transportation Research Centre, upgrading its test infrastructure for the military, aerospace and light transport sectors. Deliverables due no later than 18 weeks after contract award.Summary generated by Maple AI
/ closes in 22 days
26-58170 Mobile Command Centre (MCC) for the Centre for Autonomous Flight Systems (CAFS)
The NRC, through its Uncrewed Flight and Autonomy Laboratory, requires one (1) autonomous mobile command centre for its Autonomous Flight Systems Centre at the Ottawa airport. The vehicle will serve as a ground control station, telemetry, safety monitoring and data recording facility for flight tests on flight autonomy and human factors, as well as remotely piloted aircraft operations at field sites across Canada.Summary generated by Maple AI
/ closes in 23 days
Masonry Conservation S-77 Sections A and B
Restoration work on the building envelope of building S-77 at the National Research Council of Canada, 100 Sussex Drive, Ottawa, Ontario, to meet heritage conservation requirements and prevent further deterioration of the facade.Summary generated by Maple AI
/ closes in 24 days
50HUM26 Steam-to-Electric Conversion
Replacement of humidifier 50HUM26 with an electric humidifier at the National Research Council of Canada, 1200 Montreal Road, Building M-50, Ottawa. Work includes removal of existing steam infrastructure in wing C of the ATF, insulation, valve installation, capping of related services, and replacement of obsolete electrical equipment.Summary generated by Maple AI
New Québec tenders are released as open data once a week: they arrive every Monday around 7 a.m. Federal tenders arrive Monday to Friday around 8 a.m. Every day, all open tenders are re-evaluated: those past their closing date close, and closing dates extended by addendum are recalculated.
Only the official tender, published by the source, is authoritative.
Procurement profile
Three sectors lead the tenders of this organization: Laboratory and scientific equipment (36%), Measuring and observing and testing instruments (7.4%) and Management advisory services (7.2%).
Of the 474 tenders from this organization, 60% are open, 14% selective or by invitation, and 25% direct awards.
June is the busiest month, year after year: 31 tenders on average, compared with 20 a month over the period. Over the last 12 months, 297 tenders were published, compared with 177 in the previous 12 months (+68%).
Activity
474 tenders published in 24 months, including 257 in 2026. Federal contracts are not published as open data: only tenders are counted.
Chart data
| Quarter | Notices — federal |
|---|---|
| 2024 Q4 | 8 |
| 2025 Q1 | 15 |
| 2025 Q2 | 55 |
| 2025 Q3 | 70 |
| 2025 Q4 | 69 |
| 2026 Q1 | 73 |
| 2026 Q2 | 46 |
| 2026 Q3 | 85 |
| 2026 Q4 | 53 |
Awarding
- Open tender286 / 60%
- Selective tender68 / 14%
- Direct award120 / 25%
Market links
Main sectors
- Laboratory and scientific equipment169 tenders
- Measuring and observing and testing instruments35 tenders
- Management advisory services34 tenders
- Building and facility maintenance and repair services17 tenders
- Nonresidential building construction services16 tenders
- Aircraft15 tenders
- Professional engineering services11 tenders
- Industrial process machinery and equipment and supplies8 tenders
- Motor vehicles8 tenders
- Software7 tenders
Comparable organizations
- Shared Services Canada (SSC)553 tenders
- Correctional Service of Canada (CSC)351 tenders
- Department of Natural Resources (NRCan)171 tenders
- Department of the Environment (ECCC )147 tenders
- Correctional Service Canada93 tenders
- Department of Employment and Social Development (ESDC)90 tenders
Frequently asked questions
- National Research Council of Canada (NRC): how many tenders are published?
- 474 tenders in 24 months, or about 20 a month. 297 of them in the last 12 months.
- National Research Council of Canada (NRC): which sectors are the most active?
- By number of tenders, the most active sectors for this organization are Laboratory and scientific equipment (36%), Measuring and observing and testing instruments (7.4%) and Management advisory services (7.2%). Shares are computed on tenders classified by sector, over 24 months.
- National Research Council of Canada (NRC): how many tenders are open today?
- 32 tenders were accepting bids on November 16, 2026. They are listed on this page by closing date, with a link to the official notice.
- What is the difference between an open tender, a selective tender and a direct award?
- An open tender is open to any company that meets the conditions of the notice. A selective or invitation-only tender is limited to companies that are pre-qualified or invited by the organization. A direct award is a contract concluded directly with a supplier, without competition, in the cases the rules allow. For this organization: 60% open tenders and 25% direct awards, over 24 months.